SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (INTERIOR TRIM)REPAIR INSTRUCTIONSFLOOR PANEL CARPET REPLACEMENT (REAR)
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Floor Panel Carpet Replacement (Rear)

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Floor Panel Carpet Replacement (Rear)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Floor Panel Carpet Assembly
G04844553Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
Preliminary Procedures 
  1. Remove third row seats.
  2. Remove rear quarter lower trim panel. Refer to REAR QUARTER LOWER TRIM PANEL REPLACEMENT .
  3. Remove liftgate door sill plate. Refer to LIFTGATE DOOR SILL PLATE REPLACEMENT .
1 Rear Floor Panel Carpet Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.