SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (INTERIOR TRIM)REPAIR INSTRUCTIONSCONSOLE REAR TRIM PLATE REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Console Rear Trim Plate Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Console Rear Trim Plate Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Console Rear Trim Plate Components
G04844543Courtesy of SUZUKI OF AMERICA CORP.
CONSOLE REAR TRIM PLATE COMPONENTS REFERENCE

Callout Component Name
1 Console Rear Bolt Covers (Qty 2)
  1. Move the seat forward in order to access the rear bolt covers.
  2. Use a flat bladed plastic trim tool to remove the covers.
2 Console Trim Plate Screws (Qty 4)
CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.

Tightening torque 
2 N.m (18 lb in) 
3 Console Trim Plate Assembly - Rear
  1. Disconnect the electrical connections.
  2. If replacing the Console Trim Plate, transfer all necessary components.
4 Retainer Clips (Qty 1)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.