Fastener Tightening Specifications - Engine Controls - 3.6L (LY7)

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Fastener Tightening Specifications - Engine Controls - 3.6L (LY7)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS - ENGINE CONTROLS - 3.6L (LY7)

Application Specification
Metric English
Fuel Fill Tube Clamp 5 N.m 44 lb in
Fuel Fill Tube Bracket Bolt 12 N.m 106 lb in
Fuel Rail Bolt 10 N.m 89 lb in
Fuel Tank Strap Bolt 25 N.m 18 lb ft
Rear Brake Line to Rear Brake Hose Fitting 18 N.m 13 lb ft
Rear Brake Line Fitting to Brake Pressure Module 21 N.m 16 lb ft
Rear Drive Module Propeller Shaft Guard Bolt 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.