SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 41 (FUEL SYSTEM)REPAIR INSTRUCTIONSFUEL FEED PIPE REPLACEMENTINSTALLATION PROCEDURE
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Installation Procedure

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Installation Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fuel Feed Pipe To Fuel/EVAP/Brake Pipe Assembly Clips
G04843381Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the fuel feed pipe to the fuel/EVAP/brake pipe assembly clips.
    Fig 2: Identifying Fuel/EVAP/Brake Pipe Clips & Push Pin
    G04843382Courtesy of SUZUKI OF AMERICA CORP.
  2. With the aid of an assistant, position and install the fuel/EVAP/brake pipe clips (2) to the underbody studs.
  3. Install the push pin (1) to the underbody side rail hole.
    Fig 3: Connecting Right Rear Brake Line Fitting To Rear Brake Hose
    G04843383Courtesy of SUZUKI OF AMERICA CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.