SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 34 (STEERING WHEEL AND COLUMN)REPAIR INSTRUCTIONSMULTIFUNCTION TURN SIGNAL SWITCH HOUSING REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Multifunction Turn Signal Switch Housing Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Multifunction Turn Signal Switch Housing Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Multifunction Turn Signal Switch Housing
G04843988Courtesy of SUZUKI OF AMERICA CORP.
CALLOUT COMPONENT NAME

Callout Component Name
Preliminary Procedures 
  1. Remove the inflatable restraint steering wheel module coil. Refer to INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT .
  2. Remove the turn signal multifunction switch. Refer to TURN SIGNAL MULTIFUNCTION SWITCH REPLACEMENT .
  3. Remove the wipers/washer switch. Refer to WIPERS/WASHER SWITCH REPLACEMENT .
1 Multifunction Turn Signal Switch Housing
Procedure 
Release the 2 retaining tabs to remove the housing from the steering column.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.