SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 30 (ENGINE MECHANICAL)REPAIR INSTRUCTIONSINTAKE MANIFOLD DISASSEMBLEUPPER INTAKE MANIFOLD DISASSEMBLE PROCEDURE
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Upper Intake Manifold Disassemble Procedure

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Upper Intake Manifold Disassemble Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Throttle Body Bolts
G04841938Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the throttle body bolts.
    Fig 2: Identifying Throttle Body
    G04841939Courtesy of SUZUKI OF AMERICA CORP.
  2. Remove the throttle body.
    Fig 3: Identifying Throttle Body Gasket
    G04841940Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove and discard the throttle body gasket.
    Fig 4: Identifying Upper Intake Manifold Expansion Plugs
    G04841941Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove and discard the upper intake manifold expansion plugs, if required.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.