Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3 (GLASS/WINDOWS/MIRRORS)REPAIR INSTRUCTIONSREAR SIDE DOOR WINDOW REGULATOR REPLACEMENTREMOVAL PROCEDURE
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Removal Procedure
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door outside handle. Refer to REMOVAL PROCEDURE .
- Remove the rear door window run channel assembly. Refer to REMOVAL PROCEDURE .
- Remove the rear door lower speaker. Refer to RADIO REAR SIDE DOOR SPEAKER REPLACEMENT .
- Disconnect the electrical connector rosebuds.
- Loosen the 2 rear module bolts.
- Remove the 4 remaining module bolts.
- Remove the 3 latch bolts from the door shut face.
- Disconnect the door harness at the door jamb.
- Remove the window regulator module from the door.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.