SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 29 (ENGINE EXHAUST SYSTEM)REPAIR INSTRUCTIONSEXHAUST FLEXIBLE PIPE REPLACEMENTREMOVAL PROCEDURE
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Removal Procedure

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Catalytic Converter Nuts
G04843541Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the right and left catalytic converter to exhaust flexible pipe bolts and nuts.
  2. Remove the flexible pipe insulator from the pipe hanger.
    Fig 2: Removing Flexible Pipe Insulator From Pipe Hanger
    G04843542Courtesy of SUZUKI OF AMERICA CORP.
  3. Loosen the exhaust muffler clamps.
    Fig 3: Identifying Exhaust Muffler Clamps
    G04843543Courtesy of SUZUKI OF AMERICA CORP.
  4. Separate the exhaust flexible pipe from the catalytic converters.
  5. Remove the exhaust flexible pipe from the muffler.
  6. Remove and discard the catalytic converter to flexible pipe gaskets.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.