SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 21 (DIFFERENTIAL)REPAIR INSTRUCTIONSREAR AXLE LUBRICANT LEVEL INSPECTION
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Rear Axle Lubricant Level Inspection

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Rear Axle Lubricant Level Inspection
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fill Plug
G04843785Courtesy of SUZUKI OF AMERICA CORP.
PRELIMINARY PROCEDURE

Callout Component Name
Preliminary Procedure 
Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
1 Rear Differential Fill Plug
CAUTION: Refer to FASTENER NOTICE .

  1. The fluid level should be level with the bottom of the threads of the fill hole.
  2. If the fluid level is low, refer to REAR AXLE LUBRICANT REPLACEMENT  for the proper fill instructions and type of fluid.

Tightening torque 
Tighten the fill plug to 39 N.m (29 lb ft). 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.