SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 17 (SECURITY AND LOCKS)GENERAL DESCRIPTIONCONTENT THEFT DETERRENT (CTD) DESCRIPTION AND OPERATIONINPUTS
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Content Theft Deterrent (CTD) Description and Operation: Inputs

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Inputs
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

The BCM monitors the following inputs:

  • The door LOCK / UNLOCK switch; a serial data message from the DDM
  • The driver and passenger door ajar switches; both a serial data message from the DDM / PDM and a discrete input
  • The liftgate / liftglass ajar switch; a discrete input to the BCM
  • The keyless entry transmitter LOCK / UNLOCK buttons; a serial data message from the RCDLR
  • The immobilizer status-The BCM uses the immobilizer status for disarming the system or silencing and alarm when the correct vehicle key is used to start the vehicle

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.