SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 15 (INSTRUMENTATION/DRIVER INFO./HORN)REPAIR INSTRUCTIONSINSTRUMENT PANEL COMPARTMENT REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Instrument Panel Compartment Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Instrument Panel Compartment Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Instrument Panel Compartment Assembly & Screws
G04845173Courtesy of SUZUKI OF AMERICA CORP.
INSTRUMENT PANEL COMPARTMENT REFERENCE TABLE

Callout Component Name
Preliminary Procedure 
Remove the Instrument Panel Compartment Door Assembly. Refer to INSTRUMENT PANEL COMPARTMENT DOOR REPLACEMENT .
1 Instrument Panel Compartment Screws (Qty 9)
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
2 N.m (18 lb in) 
2 Instrument Panel Compartment Assembly
Procedures 
  1. Disconnect the electrical connections.
  2. When replacing the compartment assembly, transfer all the necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.