Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 14 (AUTOMATIC TRANSMISSION)REPAIR INSTRUCTIONSTRANSMISSION FLUID BAFFLE INSTALLATION
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Transmission Fluid Baffle Installation
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Transmission Fluid Baffle Installation
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Install the transmission case fluid passage cover (40).CAUTION: Refer to FASTENER NOTICE .
- Install the 2 - M6 x 1.0 x 14 mm transmission case fluid passage cover bolts (41).
Tightening torque
Tighten the transmission case fluid passage cover bolts to 5 N.m (44 lb in) .
- Install the transmission fluid baffle (44).
- Install the 3 - M6 x 1.0 x 14 mm transmission fluid baffle bolts (45).
Tightening torque
Tighten the transmission fluid baffle bolts to 5 N.m (44 lb in) .
Reference: FLUID FILTER INSTALLATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.