SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSREAR SEAT NO. 2 HEAD RESTRAINT GUIDE REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Rear Seat No. 2 Head Restraint Guide Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Rear Seat No. 2 Head Restraint Guide Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Seat Head Restraint & Front Seat Head Restraint Guides
G04843048Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
Preliminary Procedure 
Remove the rear seat back cushion finish panel. Refer to REAR SEAT NUMBER 2 BACK CUSHION PANEL REPLACEMENT .
1 Rear Seat Head Restraint
  1. Push the button in and raise the head restraint to the full-up position.
  2. Insert a small round tool into the guide hole
  3. Pull up to remove the head restraint.
2 Front Seat Head Restraint Guides
Tip:  Squeeze the bottom of the guides together and push upward to remove.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.