SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSFRONT SEAT HEAD RESTRAINT GUIDE REPLACEMENT (NON FOLD FLAT)
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Front Seat Head Restraint Guide Replacement (Non Fold Flat)

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Front Seat Head Restraint Guide Replacement (Non Fold Flat)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Seat Head Restraint Guide & Front Seat Head Restraint
G04843000Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
1 Front Seat Head Restraint
Refer to FRONT SEAT HEAD RESTRAINT REPLACEMENT .
2 Front Seat Head Restraint Guides
  1. Disconnect the lower J-hook retainer from the seat back trim cover.
  2. Carefully pull up the trim cover, disengaging the hook and loop retainers, until the headrest guides are exposed.
  3. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back pad.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.