Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 114 (GLASS/WINDOWS/MIRRORS)DIAGNOSTIC INFORMATION AND PROCEDURESPOWER DOOR MIRROR CONTROL SYSTEM SYMPTOM DIAGNOSIS
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Power Door Mirror Control System Symptom Diagnosis
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Power Door Mirror Control System Symptom Diagnosis
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
POWER DOOR MIRROR CONTROL SYSTEM SYMPTOM DIAGNOSIS
| Condition | Possible Cause | Action |
|---|---|---|
| All power mirrors do not operate | Circuit fuse blown | Replace fuse and check for short circuit . |
| Power door mirror switch faulty | Check power door mirror switch referring to POWER DOOR MIRROR SWITCH INSPECTION . | |
| Wiring or grounding faulty | Repair circuit . | |
| One power mirror does not operate | Power door mirror switch faulty | Check power door mirror switch referring to POWER DOOR MIRROR SWITCH INSPECTION . |
| Power door mirror actuator faulty | Check actuator referring to POWER DOOR MIRROR ACTUATOR INSPECTION . | |
| Wiring or grounding faulty | Repair circuit . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.