Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 11 (CHARGING SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST - ENGINE ELECTRICALBODY CONTROL MODULE (BCM)
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Body Control Module (BCM)
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Body Control Module (BCM)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
SCAN TOOL DATA LIST - BODY CONTROL MODULE (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON / Engine Running | |||
| Battery Low at Start | Data Display / Charging Info | Yes / No | No |
| Batt. Open Ckt. Tested | Data Display / Charging Info | Yes / No | No |
| Batt. Open Ckt. Voltage | Data Display / Charging Info | Volts | 13.03 Volts |
| Battery Voltage | Data Display / Charging Info | Volts | 13.9 Volts |
| Batt. Voltage High Res. | Data Display / Charging Info | Volts | 12.417 Volts |
| Parasitic Current | Data Display / Charging Info | Amps | 0.0 Amps |
| Prev. State of Charge | Data Display / Charging Info | % | 90% |
| Start Up State of Charge | Data Display / Charging Info | % | 80% |
| State of Charge | Data Display / Charging Info | % | 85% |
| State of Charge Low | Data Display / Charging Info | Yes / No | No |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.