SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 10 (DATA COMMUNICATION SYSTEM)SCHEMATIC & ROUTING DIAGRAMDATA COMMUNICATION CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) C3
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Body Control Module (BCM) C3

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Body Control Module (BCM) C3
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C3 - Connector Pin Locations
G04844984Courtesy of SUZUKI OF AMERICA CORP.

Connector Part Information 

OEM: HITPB-25-C-LE

Service: -

Description: 25-Way F HIT Series (L-BU)

Terminal Part Information 

Pins: 1, 2, 3, 5

Terminal/Tray: SNAC-A061T-M2.8/20

Core/Insulation Crimp: E/A

Release Tool/Test Probe: 12094429/J-35616-4A (PU)

Pins: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22

Terminal/Tray: SNAC3-A021T-M0.64/20

Core/Insulation Crimp: J/J

Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)

BODY CONTROL MODULE (BCM) C3 CONNECTOR TERMINAL INFORMATION

Pin Wire Color Circuit No. Function
1 BK/WH 1551 Ground
2 RD/WH 240 Battery Positive Voltage
3 RD/WH 1040 Battery Positive Voltage
4 - - Not Used
5 BK/WH 1551 Ground
6 - - Not Used
7 YE 749 Security Indicator Control
8 TN/BK 2500 High Speed GMLAN Serial Data Bus+
9 TN 2501 High Speed GMLAN Serial Data Bus-
10 D-GN 5060 Low Speed GMLAN Serial Data
11 D-GN 44 Instrument Panel Lamps Dimmer Switch Signal
12 OG/WH 812 12-Volt Reference or IP Dimming Voltage Reference
13 D-BU 6037 Brake Pedal Displacement Sensor Signal
14 OG/BK 6035 Brake Pedal Displacement Sensor Low Reference
15 GY 6036 Brake Pedal Displacement Sensor 5 Volt Reference
16 TN/BK 2500 High Speed GMLAN Serial Data Bus+
17 TN 2501 High Speed GMLAN Serial Data Bus-
18 PU/WH 1382 LED Dimming Signal/LED Dimming Supply
19 L-BU 5986 Serial Data Communication Enable
20 - - Not Used
21 OG 192 Front Fog Lamp Switch Signal/Fog Lamps Enable
22 GN/WH 7158 Cruise Control Indicator Dimming Signal
23-25 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.