Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE GENERAL INFORMATION & DIAGNOSISGENERAL DESCRIPTIONENGINE AND EMISSION CONTROL INPUT/OUTPUT TABLE
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Engine and Emission Control Input/Output Table
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Engine and Emission Control Input/Output Table
ENGINE AND EMISSION CONTROL INPUT/OUTPUT TABLE
| Function | Output | Input |
|---|---|---|
| Injection control | Fuel injection |
|
| Immobilizer control | Fuel injection |
|
| Ignition coil with igniter |
|
|
| Ignition control | Ignition coil with igniter |
|
| Idle speed control | Throttle actuator |
|
| Throttle valve control | Throttle actuator |
|
| Cruise control | Throttle actuator |
|
| Generator control | Generator |
|
| A/F sensor heater control | A/F sensor |
|
| HO2S heater control | HO2S |
|
| EVAP purge control | EVAP canister purge valve |
|
| VVT control | OCV |
|
| IMT valve control | IMT valve actuator |
|
| A/C compressor control | A/C compressor relay |
|
| Radiator cooling fan control | Radiator cooling fan relay |
|
| Throttle actuator power supply control | Throttle actuator control relay |
|
| Fuel pump control | Fuel pump relay |
|
| Starting motor control relay control | Starting motor control relay |
|
| Main relay control | Main relay |
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.