SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE ELECTRICAL DEVICESREPAIR INSTRUCTIONSIMT VALVE ACTUATOR INSPECTION
2013 Suzuki SX4 Crossover, Automatic CVT Trans

IMT Valve Actuator Inspection

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION IMT Valve Actuator Inspection

Reference: "IMT VALVE ACTUATOR REMOVAL AND INSTALLATION "

CAUTION: The IMT valve actuator may be damaged if battery voltage is applied to it for longer than 10 seconds. Limit the time of battery voltage application to the IMT valve actuator to no more than 10 seconds.
  1. Connect battery positive (+) and negative (-) terminals to IMT valve actuator (1) as shown in chart below. If it does not operate as specified direction, replace IMT valve actuator.
    DIAGNOSTIC INFORMATION AND PROCEDURES REFERENCE CHART

    Rotative direction a b
    clockwise + -
    counterclockwise - +
    Fig 1: Checking IMT Valve Actuator
    G06868216Courtesy of SUZUKI OF AMERICA CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.