SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (TRANSFER ASSEMBLY)SPECIFICATIONSTIGHTENING TORQUE SPECIFICATIONS
2013 Suzuki Kizashi Sport GTS, FWD

Tightening Torque Specifications

2013 Suzuki Kizashi Sport GTS, FWDSECTION Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
CAUTION: For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS

Fastening part Tightening torque
N.m kgf-m lbf-ft
Transfer oil level/filler plug 23 2.3 17.0
Transfer oil drain plug 23 2.3 17.0
Transfer oil temperature sensor 12 1.2 9.0
Transfer stiffener bolt* 55 5.6 40.5
Transfer bolt 88 9.0 65.0
Transfer nut 88 9.0 65.0
Transfer output flange nut 100 - 300 10.2 - 30.6 74.0 - 221.5
Oil pump outer cover bolt 8.0 0.82 6.0
Transfer case bolt 23 2.3 17.0
Transfer output retainer bolt 55 5.6 40.5
NOTE: The specified tightening torque is described in the following.

Reference: 

For the tightening torque of fastener not specified in this section, refer to:

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.