Tightening Torque Specifications

2013 Suzuki Kizashi Sport GTS, FWDSECTION Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS

Fastening part Tightening torque
N.m kgf-m lbf-ft
Transaxle oil level/filler plug 27 2.8 20.0
Transaxle oil drain plug 35 3.6 26.0
Back up light switch 19 1.9 14.0
Guide case No. 1 bolt 23 2.3 17.0
Guide case No. 2 bolt 23 2.3 17.0
Gear shift inter lock bolt 23 2.3 17.0
Gear shift locating spring 28 2.9 21.0
Reverse gear shift lever bolt 23 2.3 17.0
Transaxle case bolt 23 2.3 17.0
Final gear bolt 90 9.2 66.5
NOTE: The specified tightening torque is described in the following.

Reference:Β 

For the tightening torque of fastener not specified in this section, refer to:

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.