Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (DIFFERENTIAL)GENERAL DESCRIPTIONDESCRIPTION OF 4WD CONTROL SYSTEM COMPONENT FUNCTION
2013 Suzuki Kizashi Sport GTS, FWD
Description of 4WD Control System Component Function
2013 Suzuki Kizashi Sport GTS, FWDSECTION Description of 4WD Control System Component Function
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
4WD CONTROL SYSTEM COMPONENT FUNCTION CHART
| Part Name | Function |
|---|---|
| 2WD/i-AWD switch | Output ON and OFF signal of 2WD/i-AWD switch to 4WD control module. |
| i-AWD indicator light | Indicates vehicle is at i-AWD position. |
| i-AWD warning light | Lights or blinks when 4WD control system has an abnormality. |
| 4WD control module |
|
| Coupling assembly | The driving forces is generated by the signal transmitted from the 4WD control module to the rear wheels. |
| Coupling air temperature sensor | Measures ambient temperature of the coupling. |
| Transfer oil temperature sensor | Measures transfer oil temperature. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.