Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 84 (DIFFERENTIAL)DIAGNOSTIC INFORMATION AND PROCEDURESDTC TABLE
2013 Suzuki Kizashi Sport GTS, FWD
DTC Table
2013 Suzuki Kizashi Sport GTS, FWDSECTION DTC Table
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC CHART
| DTC | DTC name | Detecting condition (DTC will set when detecting) | i-AWD warning light |
|---|---|---|---|
| C1240 | 4WD Control Module Power Supply Circuit Malfunction | 4WD control module power supply voltage is higher than or lower than specified value for specified time. | Lights up |
| C1243 | Internal Circuit Malfunction of 4WD Control Module | 4WD control module internal failure. | Lights up |
| C1250 | Coupling Air Temperature Sensor Open | Input signal from coupling air temperature sensor is higher than specified value for specified time. | Lights up |
| C1251 | Coupling Air Temperature Sensor Short | Input signal from coupling air temperature sensor is lower than specified value for specified time. | Lights up |
| C1252 | Coupling Assembly Open | 2WD/i-AWD switch is set as i-AWD, however vehicle keeps 2WD setting for more than specified time. | Lights up |
| C1253 | Coupling Assembly Short | 2WD/i-AWD switch is set as 2WD, however vehicle stays in i-AWD setting for more than specified time. | Lights up |
| C1260 | Transfer Oil Temperature Sensor Open | Input signal from transfer oil temperature sensor is higher than specified value for specified time. | Lights up |
| C1261 | Transfer Oil Temperature Sensor Short | Input signal from transfer oil temperature sensor is lower than specified value for specified time. | Lights up |
| C1270 | CAN Invalid Data from BCM | "Clutch control request" from BCM is received for more than specified time. | Lights up |
| C1281 | 4WD Tire of Different Diameter Installed | Vehicle is driven installed with different diameter tires more than specified time. | Blinks |
| C1282 | 4WD Abnormal Heat Generation |
|
Blinks |
| U0073 | Control Module Communication Bus Off | Refer to CAN DTC (LOST COMMUNICATION AND COMMUNICATION BUS OFF) TABLE . | Off |
| U0100 | Lost Communication with ECM | Lights up | |
| U0101 | Lost Communication with TCM | Lights up | |
| U0121 | Lost Communication with ABS/ESP® Control Module | Lights up | |
| U0126 | Lost Communication with Steering Angle Sensor | Lights up | |
| U0140 | Lost Communication with Body Control Module | Lights up | |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | Lights up |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.