SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 56 (ELECTRONIC STABILITY PROGRAM)DIAGNOSTICS INFORMATION AND PROCEDURESESP® SYSTEM CHECKNOTES
2013 Suzuki Kizashi Sport GTS, FWD

ESP® System Check: Notes

2013 Suzuki Kizashi Sport GTS, FWDSECTION Notes
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the following items for the details of each step.

DIAGNOSTICS PROCEDURE CHART

Step Action YES NO
1  Malfunction analysis 
  1. Perform CUSTOMER COMPLAINT ANALYSIS .
  2. Perform PROBLEM SYMPTOM CONFIRMATION .
  3. Perform DTC CHECK, RECORD AND CLEARANCE  and recheck DTC.

Is same DTC detected again after performing DTC clearance? 		 Go to Step 6. Go to Step 2.
2  Visual Inspection 
  1. Perform VISUAL INSPECTION .

Is there any faulty condition? 		 Repair or replace malfunction part, and go to Step 6. Go to Step 3.
3  Driving test 
  1. Perform STEP 3: DRIVING TEST .

Is malfunction detected? 		 Repair or replace malfunction part, and go to step 6. Go to Step 4.
4  Brakes diagnosis 
  1. Inspect and repair referring to BRAKE SYMPTOM DIAGNOSIS .

Is malfunction detected? 		 Repair or replace malfunction part, and go to step 6. Go to Step 5.
5  Intermittent problem check 
  1. Check for intermittent troubles referring to INTERMITTENT CONNECTION AND POOR CONTACT INSPECTION .

Is malfunction detected? 		 Repair or replace malfunction part, and go to step 6. Go to Step 6.
6  Final confirmation test 
  1. Perform STEP 6: FINAL CONFIRMATION TEST .

Does trouble recur? 		 Go to Step 4. End.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.