Amplifier Replacement

2013 Suzuki Kizashi Sport GTS, FWDSECTION Amplifier Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Radio Rear Compartment Speaker, Amplifier Assembly & Screws
G04843263Courtesy of SUZUKI OF AMERICA CORP.
AMPLIFIER REPLACEMENT REFERENCE

Callout Component Name
Preliminary Procedures 
Remove the right rear quarter lower trim panel. Refer to REAR QUARTER LOWER TRIM PANEL REPLACEMENT .
1 Radio Rear Compartment Speaker
Refer to RADIO REAR SPEAKER REPLACEMENT .
2 Amplifier Screw (Qty: 4)
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
3 N.m (276 lb in)
3 Amplifier Assembly
Procedure
Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.