Wipers/Washer Switch Replacement

2013 Suzuki Kizashi Sport GTS, FWDSECTION Wipers/Washer Switch Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Wipers & Washer Switch Electrical Connector
G04845197Courtesy of SUZUKI OF AMERICA CORP.
WINDSHIELD, WIPERS AND WASHER PROCEDURES TABLE

Callout Component Name
Preliminary Procedures
Remove the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
1 Wipers/Washer Switch Electrical Connector
2 Wipers/Washer Switch
Procedure
Depress the locking tabs to remove the wipers/washer switch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.