Power Door Lock Switch Replacement

2013 Suzuki Kizashi Sport GTS, FWDSECTION Power Door Lock Switch Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Power Door Lock Switch Component And Placement
G04844524Courtesy of SUZUKI OF AMERICA CORP.
POWER DOOR LOCK SWITCH REPLACEMENT REFERENCE

Callout Component Name
Preliminary ProcedureΒ 
  1. Remove front door extension trim panel. Refer to UPPER EXTENSION TRIM PANEL REPLACEMENT (FRONT SIDE DOOR) .
  2. Remove front door handle bezel. Refer to DOOR HANDLE BEZEL REPLACEMENT .
  3. Remove front door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT .
1 Front Side Door Locking System Switch Assembly
  1. Disconnect electrical connector.
  2. Use a flat-bladed tool to pry switch from door handle assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.