Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (LIGHTING SYSTEMS)SCHEMATIC AND ROUTING DIAGRAMLIGHTING SYSTEMS CONNECTOR END VIEWSTURN SIGNAL/MULTIFUNCTION SWITCH
2013 Suzuki Kizashi Sport GTS, FWD
Turn Signal/Multifunction Switch
2013 Suzuki Kizashi Sport GTS, FWDSECTION Turn Signal/Multifunction Switch
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
OEM: 15393435
Service: 88986438
Description: 10-Way F Micro 64 (GY)
Terminal Part Information
Terminal/Tray: 12177007/19
Core/Insulation Crimp: E/2
Release Tool/Test Probe: 12180559-1/J-35616-64B (L-BU)
TURN SIGNAL/MULTIFUNCTION SWITCH REFERENCE
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A | - | - | Not Used |
| B | BK/WH | 1551 | Ground |
| C | BN | 1356 | Flash To Pass Switch Signal |
| D | PU | 524 | Headlamp Dimmer Switch High Beam Signal |
| E | - | - | Not Used |
| F | BK/WH | 1551 | Ground |
| G | L-BU/WH | 1414 | Left Front Turn Signal Switch Signal |
| H | D-BU/WH | 1415 | Right Front Turn Signal Switch Signal |
| J-K | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.