Dimmer Switch

2013 Suzuki Kizashi Sport GTS, FWDSECTION Dimmer Switch
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Dimmer Switch Connector Pins
G04845050Courtesy of SUZUKI OF AMERICA CORP.

Connector Part Information 

OEM: 12020299

Service: 12102566

Description: 5-Way F P/C Edgeboard - Standard (CM)

Terminal Part Information 

Terminal/Tray: 12040511/3

Core/Insulation Crimp: E/A

Release Tool/Test Probe: 12094429/J-35616-4A (PU)

DIMMER SWITCH REFERENCE

Pin Wire Color Circuit No. Function
A - - Not Used
B D-GN 44 Instrument Panel Lamps Dimmer Switch Signal
C BK/WH 1551 Ground
D OG/WH 812 12-Volt Reference
E - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.