Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSBACKUP LAMP BULB REPLACEMENT
2013 Suzuki Kizashi Sport GTS, FWD
Backup Lamp Bulb Replacement
2013 Suzuki Kizashi Sport GTS, FWDSECTION Backup Lamp Bulb Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
BACKUP LAMP BULB REPLACEMENT REFERENCE
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the tail lamp assembly. Refer to TAIL LAMP REPLACEMENT . |
|
| 1 | Tail Lamp Harness Tip: Turn the socket a quarter turn counter-clockwise in order to access the bulb. |
| 2 | Reverse Lamp Bulb |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.