Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (LIGHTING SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS - LIGHTING
2013 Suzuki Kizashi Sport GTS, FWD
Scan Tool Output Controls - Lighting
2013 Suzuki Kizashi Sport GTS, FWDSECTION Scan Tool Output Controls - Lighting
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
BODY CONTROL MODULE REFERENCE (BCM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Backup Lamps | Light Test | The BCM activates the backup lamp relay when you select ON. The backup lamps illuminate until commanded OFF. |
| LF Turn/DRL Lamp | Light Test | The BCM activates the left front turn signal lamps when you select ON. The turn signal lamps illuminate until commanded OFF. |
| Parking Lamp | Light Test | The BCM activates the park lamp relay when you select ON. The park lamps illuminate until commanded OFF. |
| RF Turn/DRL Lamp | Light Test | The BCM activates the right front turn signal lamps when you select ON. The turn signal lamps illuminate until commanded OFF. |
| Interior Lamps | Light Test | The BCM activates the interior lamps outputs for 5 seconds when you select ON. The dome, footwell, and courtesy lamps illuminate for 5 seconds. |
| Fog Lamps | Light Test | The BCM activates the fog lamps relay when you select ON. the fog lamps illuminate until commanded OFF. |
| High Beam Relay | Light Test | The BCM activates the high beam relay when you select ON. The high beam headlamps illuminate until commanded OFF. |
| Low Beam Relay | Light Test | The BCM activates the low beam relay when you select ON. The low beam headlamps illuminate until commanded OFF. |
| LR Stop/Turn Signal Lamp | Light Test | The BCM activates the left rear stop/turn signal lamp when you select ON. The lamp illuminates until commanded OFF. |
| RR Stop/Turn Signal Lamp | Light Test | The BCM activates the right rear stop/turn signal lamp when you select ON. The lamp illuminates until commanded OFF. |
| Instrumentation Backlight Dimming | Light Test | The BCM commands the IPC to dim the instruments from full dim to full bright. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.