SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013KIZASHI SPORT GTS, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 10 (DATA COMMUNICATION SYSTEM)SCHEMATIC & ROUTING DIAGRAMDATA COMMUNICATION CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) C2
2013 Suzuki Kizashi Sport GTS, FWD

Body Control Module (BCM) C2

2013 Suzuki Kizashi Sport GTS, FWDSECTION Body Control Module (BCM) C2
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C2 - Connector Pin Locations
G04844983Courtesy of SUZUKI OF AMERICA CORP.

Connector Part Information 

OEM: HITPB-25-B-S

Service: -

Description: 25-Way F Receptacle 0.64 2.8 Unsealed (WH)

Terminal Part Information 

Pins: 1, 2, 3, 3

Terminal/Tray: SNAC-A061T-M2.8/20

Core/Insulation Crimp: E/A

Release Tool/Test Probe: 12094429/J-35616-4A (PU)

Pins: 8, 11, 12, 17, 21

Terminal/Tray: SNAC3-A021T-M0.64/20

Core/Insulation Crimp: J/J

Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)

BODY CONTROL MODULE (BCM) C2 CONNECTOR TERMINAL INFORMATION

Pin Wire Color Circuit No. Function
1 OG 1732 Inadvertent Power Supply Voltage
2 RD/WH 1240 Battery Positive Voltage
3 GY 8 Instrument Panel Lamp Supply Voltage
4-7 - - Not Used
8 BN/WH 301 Rear Park Lamps Supply Voltage/Park Lamp Switch On Signal
9-10 - - Not Used
11 L-GN/BK 1137 DRL Ambient Light Sensor Signal
12 WH 103 Automatic Headlamp Relay Control
13-16 - - Not Used
17 D-GN 306 Headlamp Switch On Signal
18-20 - - Not Used
21 L-BU 1788 Traction Control Switch Signal
22 PU/WH 5905 Key Capture/Column Lock Shift Position Signal
23-25 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.