Power Window System Initialization/Reset (Front Windows Only): Initialization

2013 Suzuki Kizashi Sport GTS, FWDSECTION Initialization
  1. Push engine switch to change ignition mode of keyless start system to "ON" (with vehicle stopped).
  2. Press down and hold power window switch until window glass reaches its fully open position and continue holding it down for additional 2 or more seconds.
  3. Pull up and hold power window switch in AUTO position until window glass reaches its fully closed position and continue holding it up for additional 2 or more seconds.
    Fig 1: Identifying Power Window Switch In Auto And Closed Position
    G06529166Courtesy of SUZUKI OF AMERICA CORP.
  4. Perform Auto DOWN and Auto UP operations to check that door glass can be opened and closed fully. Repeat procedure from Step Β 1) if Auto DOWN or Auto UP function does not work.
  5. Check anti-pinching function, see INSPECTION OF POWER WINDOW ANTI-PINCHING FUNCTIONΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.