Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2012KIZASHI SPORT GTS, FWD, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE ELECTRICAL DEVICESSPECIFICATIONSTIGHTENING TORQUE SPECIFICATIONS
2012 Suzuki Kizashi Sport GTS, FWD, Standard Trans
Tightening Torque Specifications
2012 Suzuki Kizashi Sport GTS, FWD, Standard TransSECTION Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| ECM mounting nut | 5.5 | 0.56 | 4.0 |
| Accelerator pedal assembly bracket nut | 13 | 1.3 | 9.5 |
| Accelerator pedal assembly nut | 13 | 1.3 | 9.5 |
| ECT sensor | 13 | 1.3 | 9.5 |
| A/F sensor | 45 | 4.6 | 33.5 |
| HO2S | 45 | 4.6 | 33.5 |
| CMP sensor bolt | 11 | 1.1 | 8.5 |
| CKP sensor bolt | 11 | 1.1 | 8.5 |
| Knock sensor bolt | 25 | 2.5 | 18.5 |
| MAF and IAT sensor screw | 0.9 | 0.09 | 1.0 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.