Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2012KIZASHI SPORT GTS, 4WDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE ELECTRICAL DEVICESSPECIFICATIONSTIGHTENING TORQUE SPECIFICATIONS
2012 Suzuki Kizashi Sport GTS, 4WD
Tightening Torque Specifications
2012 Suzuki Kizashi Sport GTS, 4WDSECTION Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| ECM mounting nut | 5.5 | 0.56 | 4.0 |
| Accelerator pedal assembly bracket nut | 13 | 1.3 | 9.5 |
| Accelerator pedal assembly nut | 13 | 1.3 | 9.5 |
| ECT sensor | 13 | 1.3 | 9.5 |
| A/F sensor | 45 | 4.6 | 33.5 |
| HO2S | 45 | 4.6 | 33.5 |
| CMP sensor bolt | 11 | 1.1 | 8.5 |
| CKP sensor bolt | 11 | 1.1 | 8.5 |
| Knock sensor bolt | 25 | 2.5 | 18.5 |
| MAF and IAT sensor screw | 0.9 | 0.09 | 1.0 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.