SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2012KIZASHI SPORT GTS, 4WDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMREPAIR INSTRUCTIONSFUEL LEAKAGE CHECK PROCEDURE
2012 Suzuki Kizashi Sport GTS, 4WD

Fuel Leakage Check Procedure

2012 Suzuki Kizashi Sport GTS, 4WDSECTION Fuel Leakage Check Procedure

After performing any service on fuel system, check that there is no fuel leakage as follows.

  1. Apply fuel pressure to fuel feed line according to the following procedure.
    1. a) Push engine switch to change ignition mode to "ON" and to operate fuel pump.
    2. b) After 2 sec., push engine switch to change ignition mode to "OFF".
    3. Repeat Step  a) and  b) three or four times.
  2. Check that there is no fuel leakage from any part of fuel system.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.