Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUZUKI2012KIZASHI SPORT GTS, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCHARGING SYSTEMSREPAIR INSTRUCTIONSBATTERY REMOVAL AND INSTALLATIONREMOVAL

2012 Suzuki Kizashi Sport GTS, 4WD

Battery Removal and Installation: Removal

2012 Suzuki Kizashi Sport GTS, 4WDSECTION Removal

Disconnect negative (-) cable (1) at battery (4).
Disconnect positive (+) cable (2) at battery.
Remove retainer (3).
Remove battery.

Fig 1: Identifying Battery, Cables And Retainer
Courtesy of SUZUKI OF AMERICA CORP.
Remove battery tray (1).
Remove battery bracket (2) by removing air cleaner assembly, see AIR CLEANER FILTER REMOVAL AND INSTALLATION and ECM, see ECM REMOVAL AND INSTALLATION if necessary.

Fig 2: Identifying Battery Tray And Bracket
Courtesy of SUZUKI OF AMERICA CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.