Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2012GRAND VITARA PREMIUM, AWDREPAIR AND DIAGNOSISGENERAL INFORMATIONRESET PROCEDURESTIRE PRESSURE MONITOR SYSTEMSTPMS RESET PROCEDURESTIRE PRESSURE SENSOR REGISTRATIONUSING SUZUKI SCAN TOOL
2012 Suzuki Grand Vitara Premium, AWD
Using SUZUKI Scan Tool
2012 Suzuki Grand Vitara Premium, AWDSECTION Using SUZUKI Scan Tool
- Turn ignition switch to OFF position.
- Connect scan tool (SUZUKI-SDT) to Data Link Connector (DLC), located on underside of instrument panel at driver's seat side.
- Turn ignition switch to ON position.
- Select "TPMS ID registration" of "UTILITIES" under "BCM" mode of scan tool.
- Using TPM Activation Tool (09945-86510), activate each tire pressure sensor, according to the instructions displayed on activation tool, within 90 seconds.NOTE: Ensure activation tool is positioned as shown in Fig 1, or sensor IDs may not register.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.