Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2010KIZASHI FWD L4-2.4LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONMONITORS, TRIPS, DRIVE CYCLES AND READINESS CODESOBD SYSTEM DESCRIPTION - COMPREHENSIVE COMPONENT (ENGINE INPUT) MONITOR
2010 Suzuki Kizashi FWD L4-2.4L
OBD System Description - Comprehensive Component (Engine Input) Monitor
2010 Suzuki Kizashi FWD L4-2.4LSECTION OBD System Description - Comprehensive Component (Engine Input) Monitor
OBD System Description - Comprehensive Component (Engine Input) Monitor
Monitoring Procedure
Input signals for the following sensor circuits are checked for open and short by monitoring input voltage.
- MAF sensor (P0102, P0103)
- IAT sensor (P0112, P0113)
- ECT sensor (P0117, P0118)
- TP sensor (P0122, P0123, P0222, P0223)
- Knock sensor (P0327, P0328)
- APP sensor (P2122, P2123, P2127, P2128)
- Barometric pressure sensor (P2228, P2229)
DTC Description/Detecting/Confirmation Procedure
P0102, P0103
Refer to DTC P0102/P0103. P0102
P0112, P0113
Refer to DTC P0112/P0113. P0112
P0117, P0118
Refer to DTC P0117/P0118. P0117
P0122, P0123
Refer to DTC P0122/P0123. P0122
P0222, P0223
Refer to DTC P0222/P0223. P0222
P0327, P0328
Refer to DTC P0327/P0328. P0327
P2122, P2123
Refer to DTC P2122/P2123. P2122
P2127, P2128
Refer to DTC P2127/P2128. P2127
P2228, P2229
Refer to DTC P2228/P2229. P2228
Sensor Circuit Monitor
Operation
Enabled conditions
Typical malfunction thresholds
Monitoring Procedure
Input signals for the following sensor circuits are checked for open and short by monitoring input voltage.
- MAF sensor (P0102, P0103)
- IAT sensor (P0112, P0113)
- ECT sensor (P0117, P0118)
- TP sensor (P0122, P0123, P0222, P0223)
- Knock sensor (P0327, P0328)
- APP sensor (P2122, P2123, P2127, P2128)
- Barometric pressure sensor (P2228, P2229)
DTC Description/Detecting/Confirmation Procedure
P0102, P0103
Refer to DTC P0102/P0103. P0102
P0112, P0113
Refer to DTC P0112/P0113. P0112
P0117, P0118
Refer to DTC P0117/P0118. P0117
P0122, P0123
Refer to DTC P0122/P0123. P0122
P0222, P0223
Refer to DTC P0222/P0223. P0222
P0327, P0328
Refer to DTC P0327/P0328. P0327
P2122, P2123
Refer to DTC P2122/P2123. P2122
P2127, P2128
Refer to DTC P2127/P2128. P2127
P2228, P2229
Refer to DTC P2228/P2229. P2228
Sensor Circuit Monitor
Operation
Enabled conditions
Typical malfunction thresholds
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.