Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2010KIZASHI FWD L4-2.4LREPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRREMOVAL AND REPLACEMENTREAR SEAT REMOVAL AND INSTALLATION
2010 Suzuki Kizashi FWD L4-2.4L
Rear Seat Removal and Installation
2010 Suzuki Kizashi FWD L4-2.4LSECTION Rear Seat Removal and Installation
Rear Seat Removal And Installation
Removal
1. Remove seat cushion assembly.
2. Remove left and right seatback assemblies by removing 2 bolts each.
3. Disassemble and repair seat if necessary.
Installation
Reverse removal procedure noting the following point.
- Refer to Rear Seat Components for tightening torque.Overhaul
Removal
1. Remove seat cushion assembly.
2. Remove left and right seatback assemblies by removing 2 bolts each.
3. Disassemble and repair seat if necessary.
Installation
Reverse removal procedure noting the following point.
- Refer to Rear Seat Components for tightening torque.Overhaul
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.