Trim Height Specifications

2009 Suzuki XL7 Premium, AWDSECTION Trim Height Specifications
TRIM HEIGHT SPECIFICATIONS

Application Specification
Model/PKG Tire Size Curb Height
Front Suspension Height (P) SLF26 and SLG26 P235/65R16 QKG
P235/60R17 QLJ
818 mm Β± 10 mm
823 mm Β± 10 mm
Rear Suspension Height (R) SLF26 and SLG26 P235/65R16 QKG
P235/60R17 QLJ
832 mm Β± 10 mm
836 mm Β± 10 mm
Front Suspension Height (Z) SLF26 and SLG26 P235/65R16 QKG
P235/60R17 QLJ
18 mm Β± 10 mm
18 mm Β± 10 mm
Rear Suspension Height (D) SLF26 and SLG26 P235/65R16 QKG
P235/60R17 QLJ
42 mm Β± 10 mm
42 mm Β± 10 mm
The rear suspension D Height is the difference (D = a - b) measured as a horizontal line through the center of the cradle attachment bolt (a) and the center of the knuckle attachment bolt (b).
All measurements are taken with a full tank of gas.
Fig 1: Identifying Z Height For Front Suspension
G04843639Courtesy of SUZUKI OF AMERICA CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.