Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2009 Suzuki XL-7 2WD V6-3.6L
Windows and Glass: Specifications
2009 Suzuki XL-7 2WD V6-3.6LSECTION Specifications
Torque Specifications
Front Door Window Run Channel Seal Lower Bolts 8 Nm (71 in. lbs.)
Front Door Window Run Channel Upper Corner Screw 6 Nm (50 in. lbs.)
Outer Belt Sealing Strip Screw 1.5 Nm (13 in. lbs.)
Rear Door Window Run Channel Seal Lower Bolts 18 Nm (11 ft. lbs.)
Door Window Regulator Bolts 10 Nm (89 in. lbs.)
Door Window Regulator Motor Screws 8 Nm (71 in. lbs.)
Front Door Latch Screws 10 Nm (89 in. lbs.)
Module Bolts 8 Nm (71 in. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.