Wheel Speed Sensor

2009 Suzuki XL-7 2WD V6-3.6LSECTION Wheel Speed Sensor
Wheel Speed Sensor (WSS) - Left Front

Wheel Speed Sensor (WSS) - Left Front:






Connector Part Information
OEM: 12052644
Service: -
Description: 2-Way F Metri-Pack 150 Series, Sealed (GY)

Terminal Part Information
Terminal/Tray: 12048074/2
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094429/J-35616-2A (GY)

Wheel Speed Sensor (WSS) - Left Front:






Wheel Speed Sensor (WSS) - Left Rear

Wheel Speed Sensor (WSS) - Left Rear:






Connector Part Information
OEM: 12162343
Service: -
Description: 2-Way M Metri-Pack 150 (GY)

Terminal Part Information
Terminal/Tray: 12045773/2
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094429/J-35616-3 (GY)

Wheel Speed Sensor (WSS) - Left Rear:






Wheel Speed Sensor (WSS) - Right Front

Wheel Speed Sensor (WSS) - Right Front:






Connector Part Information
OEM: 12052644
Service: -
Description: 2-Way F Metri-Pack 150 Series, Sealed (GY)

Terminal Part Information
Terminal/Tray: 12048074/2
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094429/J-35616-2A (GY)

Wheel Speed Sensor (WSS) - Right Front:






Wheel Speed Sensor (WSS) - Right Rear

Wheel Speed Sensor (WSS) - Right Rear:






Connector Part Information
OEM: 12162343
Service: -
Description: 2-Way M Metri-Pack 150 (GY)

Terminal Part Information
Terminal/Tray: 12045773/2
Core/Insulation Crimp: E/1
Release Tool/Test Probe: 12094429/J-35616-3 (GY)

Wheel Speed Sensor (WSS) - Right Rear:




RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.