Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 47 (BRAKES - FRONT)SPECIFICATIONSDISC BRAKE COMPONENT SPECIFICATIONS
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
Disc Brake Component Specifications
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Disc Brake Component Specifications
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE COMPONENT SPECIFICATIONS TABLE
| Application | Specification | |||
|---|---|---|---|---|
| Metric | English | |||
| Front Brakes | ||||
| Brake Pad Lining Minimum Thickness | 2.0 mm | 0.080 in | ||
| Brake Rotor Diameter | 296.00 mm | 11.654 in | ||
| Brake Rotor Discard Thickness(1) | 27.4 mm | 1.079 in | ||
| Maximum Allowable Lateral Runout | 0.06 mm | 0.002 in | ||
| Maximum Allowable Scoring | 1.50 mm | 0.059 in | ||
| Maximum Allowable Thickness Variation | 0.025 mm | 0.001 in | ||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.