Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuse Block - I/P C2
Connector Part Information
OEM: 7283-5600-40
Service: -
Description: 6-Way F (L-GY)
Terminal Part Information
Pins: 4, 4
Terminal/Tray: 7116-4121-02/10
Core/Insulation Crimp: C/B
Release Tool/Test Probe: 12094430/J-35616-42 (RD)
Pins: 1, 3, 2
Terminal/Tray: 7116-4122-02/10
Core/Insulation Crimp: Pins 1, 3 - D/G
Core/Insulation Crimp: Pins 2 - A/B
Release Tool/Test Probe: 12094430/J-35616-42 (RD)
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | RD/BK | 642 | Battery Positive Voltage |
| 2 | RD/BK | 442 | Battery Positive Voltage |
| 3 | RD/BK | 842 | Battery Positive Voltage |
| 4 | RD/BK | 542 | Battery Positive Voltage (AG1) |
| 5-6 | - | - | Not Used |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.