Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 29 (ENGINE EXHAUST SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS - ENGINE EXHAUST
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
Fastener Tightening Specifications - Engine Exhaust
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Fastener Tightening Specifications - Engine Exhaust
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter to Exhaust Flexible Pipe Nut | 22 N.m | 16 lb ft |
| Catalytic Converter to Exhaust Manifold Nut | 50 N.m | 37 lb ft |
| Catalytic Converter Nut | 50 N.m | 37 lb ft |
| Dash Panel Heat Shield | 10 N.m | 89 lb in |
| Exhaust Manifold Heat Shield Bolt | 10 N.m | 89 lb in |
| Exhaust Manifold Bolt | 20 N.m | 15 lb ft |
| Exhaust Muffler Clamp | 5 N.m | 44 lb in |
| Fuel Tank Strap Bolt | 25 N.m | 18 lb ft |
| Rear Exhaust Manifold Heat Shield Bolt | 50 N.m | 37 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.