Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Brake Control Module (EBCM)
Connector Part Information
OEM: 7-1355628-6
Service: -
Description: 47-Way F MK25/60 Series (BK)
Terminal Part Information
Electronic Brake Control Module (EBCM)
Pins: 32
Terminal/Tray: 7116-4141-02/10
Core/Insulation Crimp: 4/3
Release Tool/Test Probe: 12094430/J-35616-42 (RD)
Pins: 1, 16
Terminal/Tray: 7116-4142-02/10
Core/Insulation Crimp: Pins 1 - A/3
Core/Insulation Crimp: Pins 16 - D/3
Release Tool/Test Probe: 12094430/J-35616-42 (RD)
Pins: 3, 11, 12, 13, 14, 18, 19, 22, 29, 33, 34, 36, 37,42, 43, 45, 46, 8
Terminal/Tray: 638551-1/16
Core/Insulation Crimp: Pins 3, 11, 12, 13, 14, 18, 19, 22, 29, 33, 34, 36, 37, 42, 43, 45, 46 - K/K
Core/Insulation Crimp: Pins 8 - J/J
Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | RD/BK | 142 | Battery Positive Voltage |
| 2 | - | - | Not Used |
| 3 | D-GN/WH | 817 | Vehicle Speed Signal |
| 4-7 | - | - | Not Used |
| 8 | L-BU | 5986 | Serial Data Communication Enable |
| 9-10 | - | - | Not Used |
| 11 | TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 12 | TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 13 | TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 14 | TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 15 | - | - | Not Used |
| 16 | BK | 250 | Ground |
| 17 | - | - | Not Used |
| 18 | TN/WH | 6433 | CAN Bus High Serial Data |
| 19 | L-GN/BK | 6432 | CAN Bus Low Serial Data |
| 20-21 | - | - | Not Used |
| 22 | GY | 6044 | Steering Angle Sensor 5 Volt Reference |
| 23-28 | - | - | Not Used |
| 29 | OG/BK | 6045 | Steering Angle Sensor Low Reference |
| 30-31 | - | - | Not Used |
| 32 | RD/WH | 140 | Battery Positive Voltage |
| 33 | TN | 833 | Right Front Wheel Speed Sensor Low Reference |
| 34 | D-GN | 872 | Right Front Wheel Speed Sensor Signal |
| 35 | - | - | Not Used |
| 36 | TN | 884 | Left Rear Wheel Speed Sensor Signal |
| 37 | OG | 885 | Left Rear Wheel Speed Sensor Low Reference |
| 38-41 | - | - | Not Used |
| 42 | WH | 883 | Right Rear Wheel Speed Sensor Low Reference |
| 43 | BN | 882 | Right Rear Wheel Speed Sensor Signal |
| 44 | - | - | Not Used |
| 45 | L-BU | 830 | Left Front Wheel Speed Sensor Signal |
| 46 | YE | 873 | Left Front Wheel Speed Sensor Low Reference |
| 47 | - | - | Not Used |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.