Scan Tool Output Controls - Anti-lock Brake System

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Scan Tool Output Controls - Anti-lock Brake System
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
SCAN TOOL OUTPUT CONTROLS DESCRIPTION

Scan Tool Output Control Additional Menu Selection(s) Description
Automated Bleed
Procedure
- Used in order to bleed ABS hydraulics. Refer to ANTI-LOCK BRAKE SYSTEM AUTOMATED BLEED PROCEDUREΒ 
Pump Motor Test - Commands the pump motor ON and OFF.
Solenoid Tests - Commands the solenoid ON and OFF.
Steering Pos. Sensor Calibration - Calibration procedure to center the steering angle sensor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.