Fastener Tightening Specifications - Lighting

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Fastener Tightening Specifications - Lighting
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS - LIGHTING

Application Specification
Metric English
CHMSL to Liftgate Screws 2 N.m 18 lb in
Fog Lamp Screws 2 N.m 18 lb in
Fog Lamp to Fascia Screws 4 N.m 35 lb in
Headlamp bolts 2.5 N.m 22 lb in
License Plate Bulb Assembly Screws 4 N.m 35 lb in
Tail Lamp Screws 2.5 N.m 22 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.