Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSHEADLAMP BULB REPLACEMENT
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
Headlamp Bulb Replacement
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Headlamp Bulb Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Turn Lamp Bulb & Socket, Headlamp Bulb (Hi/Lo), Park Auxiliary Bulb & Socket, Side Marker Lamp Bulb & Socket
HEADLAMP BULB REPLACEMENT REFERENCE
| Callout | Component Name |
|---|---|
Preliminary Procedures
|
|
| 1 | Turn Lamp Bulb Socket |
| 2 | Turn Lamp Bulb Tip: Pull the turn lamp bulb straight from the lamp socket. |
| 3 |
WARNING:
Refer to HALOGEN BULB CAUTION . Headlamp Bulb (Hi/Lo) |
| 4 | Park Auxiliary Bulb Socket |
| 5 | Park Auxiliary Bulb Tip: Pull the park auxiliary bulb straight from the lamp socket. |
| 6 | Side Marker Lamp Bulb Socket |
| 7 | Side Marker Lamp Bulb Tip: Pull the side marker lamp bulb straight from the lamp socket. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.